单螺杆挤出机—熔体泵串联挤出系统的性能与应用

从原理与应用方面，分析、探讨了单螺杆挤出机-熔体泵串联挤出系统的优异性能以及在塑料挤出成型领域的高效应用。     

铸造铝合金(ZL109)激光表面处理

采用功率为2kW级CO_2连续可调式横流激光光源,对不同涂层的ZL109试样表面进行了激光熔凝的实验研究。     

多层复合膜的成型技术

阐述了用AutoLisp程序模拟塑料熔体在2层复合膜机头内的流动情况，并介绍了复合膜机头的内部结构。     

Modeling the continuous melt transesterification of bisphenol-A and diphenyl carbonate in a continuous stirred tank reactor

A model of continuous melt transesterification of bisphenol-A and diphenyl carbonate in a continuous stirred tank reactor is developed using phase equilibria assumption and the method of molecular weight moments. The model equations can be simplified into a polynomial system that has 17 equations and 17 unknowns. Solution of the polynomial system gives out almost every aspects of the continuous transesterification process. Molecular weight and polydispersity index, end group ratio of hydroxyl to phenyl carbonate, contents of molecular species, and lost diphenyl carbonate fractions are studied in different operation parameters.     

基于不同爆轰产物的格尼速度估算新方法（英）

A new method for prediction of Gurney velocity of explosives is introduced in which energy output is correlated with the heat of detonation, the number of moles of gaseous products of detonation per gram of explosive and the average molecular weight of gaseous products. It is assumed that the CHNO explosive reacts to form products composed of N2 , CO, H2O, CO2, H2,O2 and C（s） as determined by the oxygen balance of the unreacted compound. Good agreement is obtained between measured and calculated values of Gurney velocity as compared to previous correlations which assumed the reaction products to consist of N2 , H2O, CO2 and either C（s） or O2.     

龙滩电站大法坪料场爆破施工技术研究

结合龙滩水电站大法坪料场爆破的技术难点,针对不同的岩石和要求,通过对采场的爆破分区,应用车制乳化炸药使料场开挖爆破施工取得成功,爆破料级配良好,满足了供料强度要求。     

国家粮储库屋面防水APP卷材施工技术

针对国家粮食储备库的特点，就屋面防水APP卷材热熔法施工的施工准备及工艺流程进行了介绍，提出了具体的施工技术要点及质量通病的防治措施，取得了良好的施工效果。     

Effect of the graft yield of maleic anhydride on the rheological behaviors,mechanical properties,thermal properties,and free volumes of maleic anhydride grafted high‐density polyethylene

The rheological behavior, thermal properties, and molecular mobility of a series of maleic anhydride (MA) grafted high‐density polyethylenes were characterized and evaluated. The rheological behavior was studied with a Haake minilaboratory. The viscosity of the samples in their melt state decreased with an increase in the graft yield, and this could be attributed to the higher molecular mobility for samples with a higher degree of grafting. The thermal properties were investigated with dynamic mechanical analysis and differential scanning calorimetry. Positron annihilation lifetime measurements were used to study the effect of the degree of grafting on the chemical environment and the atomic‐scale free‐volume properties. It was found that the grafted MA group played a significant chemical inhibition role in positronium formation when the graft yield was low. The results also indicated that the higher the degree of grafting was, the broader the free‐volume distribution was. The relationship between the microstructure and rheological behavior is discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

碳铬镍含量对高铬铸铁测温保护管性能的影响

通过高温氧化和高温磨损实验,研究了C、Cr、Ni 3个主要元素对高铬铸铁在高温条件下抗氧化和抗磨损性能的影响。结果表明:Cr含量越高,抗氧化性能和抗磨损性能越好;提高碳含量,明显提高高铬铸铁的高温抗磨性能;当w(Cr)=16％时,加入Ni能提高高铬铸铁的高温抗氧化性能;w(Cr)=30％时,Ni对高铬铸铁的抗氧化性能和抗磨损性能影响不明显.在1100℃以下,选用w(C)=2.8％,w(Cr)=30％、不加Ni的高铬铸铁铸造高温抗磨热电偶保护管,既有较好的使用寿命,又可降低成本.